Dimensions And Details - Kübler Sendix S3674 Betriebsanleitung

4 Installation

4.1.2 Dimensions and Details

NOTICE
4.1.2.1 Tapered Shaft Encoder
Flange type 1 with stator coupling, ø 38
TM
Molex IllumiMate
3
38,6 1,52
SW 2.5, tightening torque typ. 1 Nm
Pitch circle
Envelope circle
32 - EN
Reference to the data sheet
The technical drawing with complete dimensioning can be found in
the data sheets of the corresponding variant of the encoder.
The illustrations below only show a selection of examples. All values
without unit in the picture are given in mm [inch].
In order to simplify the drawings and information, unless otherwise
specified, the general tolerances with tolerance class m (medium) ac-
cording to ISO 2768-1 apply.
8 0,31
5 0,2
3 0,12
1:3
DIN ISO 3040
7 0,28
45,7 1,8
1
BA S36xx - R60071.0009 - 01
Kübler Group
9 0,35
3,2 0,13
2
37,5 1,48