Use According To The Intended Purpose; Foreseeable Misuse; Other Applicable Documents; Product Description - Kübler Sendix S3674 Betriebsanleitung

Kübler Group

2.4 Use According to the Intended Purpose

The encoder can be used as a rotation angle, position or speed sensor.
The encoder supports functions based on speed and rotation direction information, e.g. in in-
dustrial processes or controls.
The encoder, as well as the encoder evaluation device, must meet the requirements stated in
chapter Technical Data.

2.5 Foreseeable Misuse

The encoder is not suitable for the following uses:
• Under water.
• In publicly accessible areas.
• Outside of the specifications stated in the data sheet..
• Areas where more serious EMC events may occur than those defined in EN 61326-1.

2.6 Other Applicable Documents

All technical data, as well as the mechanical and electrical characteristics, are specified in the
corresponding data sheets of the encoders.
The above mentioned documents, the original declarations of conformity and the relevant certi-
ficates can be downloaded from our homepage: www.kuebler.com/docufinder.

3 Product Description

3.1 Scope of the Delivery

• Encoder
• Operation Manual
NOTICE

3.2 Variants Overview

Encoder type
S3674
S3684
BA S36xx - R60071.0009 - 01
Features of the encoder
The performance characteristics and the mechanical design of the
encoder depend on the selected configuration (according to order
code).
Singleturn
Multiturn
3 Product Description
EN - 27