Switching On Your Product / Measuring Your Weight; Troubleshooting - Silvercrest SPWS 180 E1 Bedienungs- Und Sicherheitshinweise

Display Language
FR French
NL Dutch
For Croatia, Romania, Bulgaria, Greece, Serbia,
Cyprus (see fig. E6):
Display Language
GB English
(defaulted
language)
HR Croatian
RS Serbian
RO Romanian
BG Bulgarian
For Online store - Germany, Online store - Belgium,
Online store - Netherlands, Online store - Czech
Republic, Online store - Poland (see fig. E7):
Display Language
DE German
(defaulted
language)
FR French
NL Dutch
CZ Czech
PL Polish
Set the desired volume for the voice output via
the volume control
the voice output, turn the volume control
completely towards "-" until it snaps into place.
Switching on your product /
measuring your weight
Tip: Weigh yourself at the same time of day
(preferably in the morning) after visiting the toilet,
with an empty stomach and without clothing to
ensure that your results are compatible.
Note: After a change of location and following
every battery change, the product must be re-cali-
brated. To do this, proceed as follows:
34 GB/MT
Unit
kg
kg
Unit
lb
kg
kg
kg
kg
Unit
kg
kg
kg
kg
kg
. In order to deactivate
4
4
Step onto the product. The product will show you an
incorrect measuring result. Then, step off the plat-
form . The product will calibrate automatically.
2
Wait until the product switches off automatically.
The product is now calibrated.
Place the product down on a solid, flat horizon-
tal surface.
The product must be calibrated before it is
weighed for the first time or when it is relocated.
Calibrated process refer to previous note.
Step on to the product.
Place even weight on each leg.
If at all possible stand on the same areas of the
platform each time and do not move. Moving
during the weighing process can lead to
discrepancies in the results.
The product will start to measure immediately.
After blinking 2 times, the weight display will
display the result, as shown in, for example, Fig. B.
The determined weight is also indicated via the
loudspeaker .
5
Note: If the product shows "0-Ld" (see Fig.
D), it signals that the product is overloaded.
Observe the maximum capacity of max. 180 kg
(for model HG04777A-DE/ HG04777B-DE);
max. 180 kg / 396 lb (for model HG04777A/
HG04777B).
Step off the platform
to "0.0" automatically after about 15 seconds.
Until then the weight measurement remains
visible.
Then, if no further movement or weighing, the
product will switch off automatically after about
further 15 seconds.
Note: If you do not step off the platform
immediately and keep standing on the platform
, the product will switch off automatically
2
after about 20 seconds.

Troubleshooting

This product has delicate electronic components.
This means that if it is placed near an object
that transmits radio signals, it could cause inter-
ference. If the LC display
move such objects away from it.
. The reading will reset
2
2
indicates a problem,
1