Storage; Malfunctions - Silvercrest SPW 1000 B2 Bedienungsanleitung

ATTENTION! DAMAGE TO PROPERTY!
► Do not use abrasive cleaners or scouring
pads, if so the anti-stick coating on the wok
pans 6 and the cooking plate 1 will be
scratched and become unusable!
Once you have removed the party wok power
cable 3 from the mains socket and the wok pans 6
and cooking plate 1 have cooled down ...
1) Use the plastic spatulas 4 to remove all
remaining food residue from the wok pans 6.
2) Thoroughly rinse the wok pans 6, the sauce
dishes 2, the plastic spatulas 4, the wooden
spatula 7 and the ladle 5 in warm water
with a mild dishwashing detergent. Do not use
any abrasive cleaners or scouring pads, other-
wise the non-stick surfaces of the wok pans 6
will be scratched and become unusable!
3) Rinse any remaining detergent off with clear
water.
4) Clean the cooking plate 1 with a moist
sponge or cloth.
5) Ensure that all parts are completely dry before
operating the party wok again.
SPW 1000 B2

Storage

Remove the power cable 3 from both the wall
■
socket and the cooking plate 1 when the appli-
ance is not being used.
■ Allow the party wok and its components to cool
down completely before storing them away.
Wrap the power cable 3 around the cable
■
retainers on the underside of the appliance.
■ Always keep the party wok outside the reach of
children in a dry and dust-free place

Malfunctions

Should the party wok not function or not function
correctly ...
Check to ensure that the power cable 3 is
■
correctly connected to the cooking plate 1.
Check to ensure that the power cable 3 is
■
correctly connected to the wall socket.
■ Check to ensure that the wall power socket to
which the party wok is connected is "live" by
connecting another appliance to it.
GB
CY
9