Truma LevelControl Gebrauchsanweisung Seite 25

Problem
Gas cylinder fill level is not updated.
No Truma LevelControl is displayed in the
Truma App
If these actions do not remedy the problem, please contact Truma Service.
Cause / Remedy
Gas cylinder empty / replace gas cylinder
Truma LevelControl not configured / configure Truma LevelControl in
Truma App
Poor acoustic coupling / place Truma LevelControl elsewhere on the
cylinder base (see "Securing Truma LevelControl on a gas cylinder" on
page 16)
Gas cylinder or coupling pad dirty (e.g. rust, ice) / clean the gas cylin-
der or coupling pad (see "Cleaning" on page 21)
Coupling pad damaged or missing / contact Truma Service
Gas cylinder in poor condition or unsuitable / replace gas cylinder (see
"Important notes" on page 15)
Truma LevelControl not installed correctly on cylinder / install as per
the instructions
Button (5) not pressed after gas cylinder change / press button (5) or
reconfigure Truma LevelControl in the Truma App
No connection possible to the Truma LevelControl / reduce distance
between Truma LevelControl and Truma iNet Box or place gas cylinder
on supporting feet (see "Supporting feet" on page 19)
25