Vitek VT-1464 W Die Betriebsanweisung Seite 4

ENGLISH
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE USING THE UNIT
After unit transportation or storage at low
temperature it is necessary to keep it for at
least two hours at room temperature before
switching on.
•
Before using the unit, wash the blender at-
tachment (1), the whisk (6), the chopping
knife (8), the chopper bowl (9) and the mea-
suring cup (10) with warm water and a neu-
tral detergent.
•
Clean the motor unit (2), whisk gear (5) and
geared lid (7) with a soft slightly damp cloth
and then wipe them dry.
Attention!
•
Do not immerse the motor unit (2), the whisk
gear (5), the geared lid (7), the power cord
and the power plug into water or any other
liquids.
•
Do not put the attachments and bowls in a
dishwashing machine.
Continuous operation time
Continuous operation time while working with
attachments (1, 6) should not exceed 1 minute,
continuous operation time while chopping food
in the chopper bowl (9) should not exceed 20-
30 seconds. Make at least a 2-minute break
between operation cycles.
USING THE BLENDER ATTACHMENT
WARNING: Before assembling make sure that
the power plug is not inserted into the socket.
•
Attach the blender attachment (1) to the
motor unit (2), matching the mark ▼ on the
motor unit (2) with the mark
tachment (1) and turn it towards the mark
till bumping.
•
Insert the plug into the socket.
•
Immerse the blender attachment (1) into the
bowl with food that you want to chop/mix; you
can also use the measuring cup (10).
Note: As the blender attachment knife rotates at
high speed, do not exceed the 200-300 ml mark
while using the measuring cup (10) to prevent
spillage/splashing.
–
Select the required attachment rotation
speed by pressing and holding the button (4)
«I» or (3) «II».
VT-1464_IM.indd 4
Note:
–
Food should be put into the bowl before
switching the unit on.
–
Before you start to chop/mix, we recommend
to peel fruit, remove inedible parts, - such as
stones, - and cut fruit into 2х2 cm cubes.
•
After you finish using the unit, take the plug
out of the socket and detach the blender at-
tachment (1), by turning it towards the mark
.
Attention!
•
Do not remove the blender-attachment (1)
during blender operation.
•
To avoid damage of the blades, do not pro-
cess too hard products such as cereals,
rice, spices, coffee beans, ice, cheese, fro-
zen food.
•
If the products are difficult to process add
some liquid.
USING THE WHISK
Use the whisk attachment (6) only for beating
cream, making biscuit dough or mixing ready
desserts.
WARNING: Before assembling make sure that
the plug is not inserted into the socket.
•
Insert the whisk attachment (6) into the gear
(5).
•
Attach the gear (5) to the motor unit (2) in
such way that the mark ▼ on the motor unit
(2) is opposite the mark
and turn it towards the mark
•
Insert the plug into the mains socket.
•
Immerse the whisk (6) into the bowl with food.
•
Select the required whisk rotation speed by
on the at- pressing and holding the button (4) "I" or
(3) "II".
•
After you finish using the unit, take the plug
out of the socket, disconnect the whisk (6)
from the gear (5) and disconnect the gear (5)
from the motor unit (2) turning it towards the
mark
Attention!
•
Do not use the whisk (6) to make tight dough.
•
Food for beating/mixing should be put into
the bowl before switching the unit on.
USING THE MINI-CHOPPER
The mini-chopper is used to chop meat, onion,
herbs, garlic, vegetables and fruits.
4
on the gear (5)
till bumping.
.
03.06.2013 17:27:42