Warranty; Technical Data; Eu Declaration Of Conformity - Kärcher GSH 18-20 Battery Bedienungsanleitung

Fault
The device does not start
up
The device stops during
operation

Warranty

The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)

Technical data

Device performance data
Nominal voltage
Idle speed
Cutting width of grass blade
Cutting length of shrub blade
Tooth pitch of shrub blade
Grass shears: Determined values in acc. with
EN 50636-2-94
Hand-arm vibration value
Uncertainty K
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L + K uncer-
WA
tainty
WA
Shrub shears: Determined values in acc. with
EN 60745-1 and EN 60745-2-15
Hand-arm vibration value
Uncertainty K
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L + K uncer-
WA
tainty
WA
Dimensions and weights
Weight with grass shears (without
battery pack)
Weight with shrub blade (without
battery pack)
Length x width x height (with grass
shear)
Length x width x height (with shrub
blade)
Subject to technical modifications.
28
Cause
Battery pack is not inserted correctly.
Battery pack is empty
Battery pack is defective.
Motor has overheated
The battery has overheated
V 18
/min 1050 +/-
10 %
mm 120
mm 200
mm 17,24
2
m/s 0,2
2
m/s 1,5
dB(A) 78,4
dB(A) 2,5
dB(A) 89
2
m/s 0,1
2
m/s 1,5
dB(A) 75,1
dB(A) 2,5
dB(A) 89
kg 1,2
kg 1,4
mm 380 x
174 x
120
mm 582 x
174 x 94
Rectification
 Push the battery pack into the mounting
until it latches into place.
 Charge the battery pack.
 Replace the battery pack.
 Stop working and allow the motor to cool
down.
 Stop working and allow the battery to cool
down to normal battery temperature.
WARNING
The specified vibration value was measured using a
standard test procedure and may be used to compare
devices.
The specified vibration value may be used in a provi-
sional assessment of the load.
Depending on the way the device is used, the vibration
emission can deviate from the specified overall value
during the current use of the device.
Determine self-protection measures based on an as-
sessment of the load under the actual operating condi-
tions. Take all parts of the operation cycle into account,
for example, the operating time as well as times when
the device is switched off and is out of operation.

EU Declaration of Conformity

We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Battery-powered grass and shrub shears
Type: GSH 18-20 Battery
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
2000/14/EC (+2005/88/EC)
2011/65/EU
Harmonised standards used
EN 55014-1: 2017
EN 55014-2: 2015
EN 60745-1:2009+A11:2010
EN 60745-2-15:2009+A1:2010
EN 60335-1:2012+A11:2014+A13:2017
EN50636-2-94:2014
EN 50581: 2012
Conformity evaluation procedure used
2000/14/EC and amended by 2005/88/EC: Appendix V
(with shrub blade only)
Sound power level dB(A)
Measured:86,1
Guaranteed:89
The signatories act on behalf of and with the authority of
the company management.
H. Jenner
Chairman of the Board of Management
Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG
English
Vibration value
S. Reiser
Director Regulatory Affairs & Certification