Cleaning And Maintenance - Silvercrest SMZT 500 A1 Bedienungsanleitung

3) Insert the blade holder
4) Add the cream.
5) Close the bowl
–
Place it onto the bowl
piece
–
Then turn the connecting piece
catches.
6) Place the motor unit
on the inner edge of the connecting piece
motor unit
7) Press the speed button I
NOTE
► To whip cream, you should make sure that it is well chilled before whipping
(max. 8°C/fridge temperature).
► For 100 ml of cream, we recommend a whipping time of around 30 seconds
at normal speed.
► For 200 ml of cream, we recommend a whipping time of around
30 – 50 seconds at normal speed.
► The whipping time can vary depending on certain factors, e.g. fat content
or the ambient temperature. Keep an eye on the cream while you are
whipping it and adjust the whipping time to fit your needs.

Cleaning and maintenance

WARNING! RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains power socket before cleaning the
appliance.
You must never immerse the appliance in water when cleaning it or hold
it under running water.
WARNING! RISK OF INJURY!
► Handle the extremely sharp blade
Reassemble the appliance after using and/or cleaning it so that you do not
injure yourself with the exposed blade
reach of children.
CAUTION! PROPERTY DAMAGE!
► Do not clean the motor unit
■ Remove the power plug from the socket.
SMZT 500 A1
with the emulsifying disc
with the connecting piece
so that the tabs on the outer rim of the connecting
grip into the catches on the bowl
onto the connecting piece
and that the motor unit
.
in the dishwasher as this will damage it.
onto the bearing
:
(see figure 1).
so that the tabs slide down into the
. Make sure that the tabs
grip into the recesses on the
sits firmly in place.
with caution as it can cause injuries.
. Keep the blade
.
out of the
GB │ IE │
27 ■