Ice cubes
5) Close the bowl
–
Place it onto the bowl
piece
–
Then, turn the connecting piece
catches and engage.
Fig. 1
6) Place the motor unit
on the inner edge of the connecting piece
motor unit
7) Depending on the type of food you want to chop, press speed button I
speed button II
NOTES
►
If larger pieces of food start collecting on the wall of the bowl during
processing, lift the motor unit
bowl
removed with a spatula.
►
Particularly hard foods should be cut into small pieces (approx. 2 cm)
before processing. Otherwise, the motor unit could block.
Use a 'pulsing' processing method when working with hard foods. To do
this, press the relevant speed button
succession.
►
If the food is not completely chopped, you can either cut it into smaller
pieces or lift the motor unit
bowl
│
GB │ IE
■
24
Food
Fill level
Meat
200 g
100 g
with the connecting piece
so that the tabs on the outer rim of the connecting
grip into the catches on the bowl
onto the connecting piece
and that the motor unit
.
a firm shake and restart the processing. Any residues can be
a firm shake and restart the processing.
Processing time
6 x 5 sec.
15 x 1 sec.
pulse
:
(see figure 1).
so that the tabs slide down into the
. Make sure that the tabs
grip into the recesses on the
sits firmly in place.
off the connecting piece
/
several times briefly in
off the connecting piece
Speed
II
II
or
. Give the
. Give the
SMZT 500 A1