Troubleshooting; Repair & Maintenance; Environmental Protection - Concept LO7020 Handbuch

3. Release the juice drain cover upwards together with the rotating sieve (Fig. 4).
4. Remove and clean the pulp bin.
5. After you finish cleaning the removable parts, follow the reverse steps to re-assemble the unit.

TROUBLESHOOTING

Problem
Motor does not run.
Motor is noisy.
Motor has stopped
operating.
ACCESSORIES
The following accessories can be bought with the unit:
Rotating sieve |42390307, Ord. No.
REPAIR & MAINTENANCE
Any extensive maintenance or repair that requires access to the inner parts of the product must be performed by an expert
service centre.

ENVIRONMENTAL PROTECTION

• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household waste.
It must be taken to the collection point of an electric and electronic equipment recycling facility. By making
sure this product is disposed of properly, you will help prevent the negative effects on the environment
and human health that would otherwise result from inappropriate disposal of this product. You can learn more about
recycling this product from your local authorities, a household waste disposal service or in the shop where you bought
this product.
24
Cause
Plug inserted into the mains outlet
incorrectly or insufficiently.
The mains outlet is not live.
Wrongly assembled upper cover or
closing clip.
Supply cable is damaged.
Wrongly mounted rotating sieve.
Motor is overloaded, heat fuse
reacted.
Price: See price list
Solution
Check the plug connection.
Check for voltage, e.g. by connecting another
appliance.
Check assembly of the unit.
Refer the unit to an authorized service center
for testing and repair.
Check assembly of the unit.
Disconnect the cable from the socket. Let the
unit cool down. Release the upper lid, empty
the pulp bin and clean the rotating sieve.
Process a smaller amount of food.
EN
LO7020