Removing And Refitting The Cover; Washing Instructions - Stokke iZi Sleep by BeSafe Bedienungsanleitung

114

Removing and refitting the cover

Pay attention when removing the cover, refitting is done
in reverse order.
Remove the head hugger, the harness padding and
the sun hood.
Removing the upper cover
(11):
• Detach the cover from the
small hooks on both sides
of the back part and from
the hood rotator (9).
• Release the rubber bands
that attach the cover to
the inside of the back.
• Open the zippers on both
sides and detach the
Velcro tape.
• Pull the cover from the
seat plate.
Removing the lower cover
(13):
• Detach the elastic knots
of the lower cover.
• Pull the cover over the
central adjuster (5).
• Detach the elastics
which attach the cover
to the inside of the seat-
part of the Stokke® iZi
Sleep™ by BeSafe®.
Refitting the cover
Refit the cover, using the in-
structions above in reversed
order. Start by pulling the
cover over the seat plate.
11

Washing instructions

9
The covers of the Stokke® iZi Sleep™ by BeSafe® shall be
washed in accordance with instructions (on the inside of
the covers). Clean harness by hand with water and mild
soap.
115
13
5