Bosch BEA 810 Betriebsanleitung Seite 20

en 20 | 1 687 023 689 – 692
5. Operation
5.1 Switch-on / switch-off
5.1.1 Switch-on
i
Always allow a waiting time of up to three minutes in
the following situations:
$
Between switching the PC off and on at the mul-
tiple socket outlet.
$
Between switch-off and switch-on using the ON/
OFF switch at the PC power supply unit.
Pressing the Standby button after switch-on shortens
the waiting time.
1. Supply the product with power.
2. Switch on the multiple socket outlet on the trolley or
connect the PC directly to the power supply.
3. Press the Standby button on the front of the PC.
 The operating system starts up.
5.1.2 Switch-off
1. End all programs.
2. Select "Start >> Shutdown".
 The operating system shuts down.
 The PC switches off automatically.
5.2 Faults
i
Contact Customer Service if any problem cannot be
rectified employing the remedies listed below.
5.2.1 Display
Fault
No display. The monitor re-
mains blank.
No display. The monitor re-
mains blank although the PC
is switched on.
5.2.2 Input
Fault
Keypad input not functio-
ning.
Mouse input not functio-
ning.
|
1 689 989 190 2018-02-24
Remedy
Make sure the PC and all other
components are being supplied
with power.
Make sure the multiple socket
outlet at the trolley has been
switched on.
Make sure all connecting cables
and the power cord are connec-
ted to the monitor.
Check the monitor settings
(brightness, contrast, alignment
etc.).
Remedy
Make sure the keypad is properly
connected to the PC.
Release any sticking keys and
clean the keypad or replace fol-
lowing the ingress of liquid and
in the case of persistent prob-
lems.
Make sure the mouse is properly
connected to the PC.
5.2.3 Reproduction
Fault
No sound reproduction.
No reproduction of data
from CD/DVD.
5.2.4 Application
i
Take the action described below in the given se-
quence if the application or PC no longer reacts.
Contact Customer Service if this action does not
help.
Windows task manager
1. Employ one of the following options to start the
"Windows Task Manager".
$
Press <Ctrl> + <Alt> + <Del>.
$
Press <Ctrl> + <Shift> + <Esc>.
$
Click onto the task bar with the right mouse key
and select "Start Task Manager" in the context
menu.
 "Windows Task Manager" is displayed.
2. Select the application which is not reacting.
3. Select <End Task>.
 The selected application is terminated.
Restart
¶
Press the Reset button on the front of the PC.
 The operating system shuts down and starts up
again.
Forced switch-off
1. Press the Standby button on the front of the PC for
more than three seconds.
 The operating system shuts down.
2. Press the Standby button on the front of the PC.
 The operating system starts up.
Remedy
If the monitor has integrated
loudspeakers, make sure the mo-
nitor audio input is connected to
the audio output of the PC.
Make sure the sound function
has been activated in the system
settings.
Make sure the CD/DVD is clean,
exhibits no major damage (scrat-
ches etc.) and is inserted the
right way round in the drive.
Robert Bosch GmbH