Open Window Detection, Activation/ Deactivation Of The Auto Mode; Pin Code Lock - Farho NOVA LITTLE Gebrauchsanweisung

OPEN WINDOW DETECTION, ACTIVA-
TION/ DEACTIVATION OF THE AUTO
MODE
The automatic mode enabled is the default setting.
1- Press or .
2÷
= automatic mode enabled.
2))
= automatic mode disabled.
2- To save and move automatically to the next setting, press
. To exit the user settings, press

PIN CODE LOCK

Overview
Your heating device is protected by a safety code against
nonauthorised use. The PIN code (Personal Identity Number) is a
customisable 4 numbers code. When enabled, it prevents
access to the following settings:
- Selecting the Comfort mode : The access to the Comfort mode
is forbidden, only the Auto, Eco and Frost protection modes
are available.
- Minimum and maximum Limits of the setting temperature
range (the Comfort temperature modification is forbidden out
of the authorised setting range).
- Programming mode.
- Open window detection settings.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
3 important steps are needed for the first use of the PIN code
lock:
1 - PIN code initialisation, enter the preset PIN code (0000) to
access to the feature.
2 - Activation of the PIN Code to lock settings which will be
protected by the PIN code.
3 - Customizing the PIN code, replace 0000 by the custmized
code
PIN code initialisation
By default, the PIN code is not enabled.
display.
1- By default registered PIN code is 0000.
Press
2- For others numbers, select 0 by press
When 0000 appears, press on
The PIN code is initialized, the next setting automaticaly appears:
PIN Code activation.
Activation/deactivation of the PIN Code
3 times.
2))
1-
Press
2÷
appears on the display.
2÷
2))
2- Press
display.
The PIN code is enabled. Any modification of reserved settings
2))
appears on the
listed in "Overview" is now impossible.
14 22
or to select 0. It is blinking. Save by pressing
.
again to save and exit.
appears on the display.
or to enable PIN code.
= PIN code enabled
= PIN code disabled
to save and return to the home installer settings
.
14