Herunterladen Inhalt Inhalt Diese Seite drucken

Information About Priorities Between The Different Modes; Optional: Remotely Management By Infrared Remote Control; User Settings; Access - Farho NOVA LITTLE Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für NOVA LITTLE:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3- This modification will be automatically cancelled at the next
order sent by the central control unit or the transition to 00:00.
INFORMATION ABOUT PRIORITIES BE-
TWEEN THE DIFFERENT MODES
Principe
In Comfort, Eco and Frost protection modes, only orders of the
open window sensor will be considered.
In Auto mode, the device can receive different orders coming
from :
- 7 day and daily programming integrated (Comfort or Eco
orders);
- 6-order pilot wire, if connected to central control unit;
- Open window detector.
In general, it is the lowest received order which prevails except
when the pilot wire is connected to an energy management
system, in this case the orders of the pilot wire take priority.
- If an open window is detecting, switching to frost protection
takes precedence unless a load shedding order is present on
the pilot wire.
- The Boost activation will take precedence over others orders
received except when the standby (stop) order is present on
the pilot wire, the device will switch off and the Boost will be not
activated.
• Examples
7 day and daily programming
Pilot wire 6 orders
Eco
7 day and daily programming
Pilot wire 6 orders
Open window detector
Standby mode
OPTIONAL: REMOTELY MANAGEMENT BY
INFRARED REMOTE CONTROL
Your towel rails can be managed by a remote control with in-
frared transmission through its IR receiver located on the front of
the controller.
Diagram
Operation
Position the remote control toward the infrared receiving
window of the device.
Check that there is no obstacle between the remote control
and the infrared receiver to disturb the transmission.
= Comfort
= Eco
= Eco
= Stop (standby mode)
= Frost protection
11
19
Display of the ambient temper-
ature
Boost: activation of the boost
Selection of the Auto, Comfort,
Eco, Frost protection modes
Adjustment of the setting
temperature desired and the
boost duration
Note: the buttons
,
have the same features as the buttons
on the controller.
,
and
10

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Nova

Inhaltsverzeichnis