Operation; Diagram; Power On/Standby Mode; Selecting The Operating Mode - Farho NOVA LITTLE Gebrauchsanweisung

OPERATION

DIAGRAM

• Buttons overview
1
Infrared receiver
2
Button power on/standby mode
3
Selecting operating modes
Plus and minus buttons, used to set temperatures, time, date and
4
2 programmes
Save settings
Boost
• Indicators overview
Boost indicator light
2
Gauge consumption
3
Heating indicator
4
Days of the week (1=Monday ... 7= Sunday)
5
Setting temperature
6
Open window detection indicator
7
Keypad locked
8
Radio transmission indicator
9
Operation modes:
Auto mode
Comfort mode
Eco mode
Frost protection mode
Time and date setting mode
Programming mode
Settings
Important: In Auto, Comfort, Eco and Standby mode, back-
light turns off automatically after 20 seconds if no buttons are
pressed. It will be necessary to reactivate it by pressing one of
the keypad buttons before making settings.
Note
Before carrying out any setting procedures, ensure that
the keypad is indeed unlocked

POWER ON/STANDBY MODE

Power on feature
Press the
mode.
beep
Help for the visually impaired: sound signals
The device makes 2 short beeps to notify that it is in operation,
in Auto mode.
Standby mode
This function allows you to stop the heating in summer, for ex-
ample.
Press the
Help for the visually impaired: sound signals
The device makes 1 short beep to notify that it is in standby
mode.

SELECTING THE OPERATING MODE

The button allows you to adapt the oper-
ating schedule of your device to your needs,
depending on the season, whether your home is
occupied or not.
Press the
required mode.
Mode sequence
In Automatic Mode, the device will
automatically change from Comfort
mode to Eco mode according to the
established programme.
3 different cases depending on your set-up
7 day and daily programme
Your device has been programmed and is executing Comfort and Eco
mode orders in line with the settings and time periods you have selected
(see page 6). (see "7 day and daily programme integrated" chapter page
4 12
button to put the device in operation, in Auto
beep
button to put the device in standby mode.
beep
button several times to select the
:
Mode overview Display
:
7).
4