Open Window Detection, Energy Savings - Farho NOVA LITTLE Gebrauchsanweisung

Choices and allocation programmes
1- If you just set the time and day, the cursor moves automati-
cally under PROG.
From Auto, Comfort, Eco or Frost protection mode, then press
for 5 seconds. When the cursor positionned under the
set time symbol , press
Prior information:
display area
The days of the week will scroll on display with the programmes
that you set for them, meaning Comfort
2- Press or .
The programme set for day 1 (1= Monday, 2 = Tuesday, etc.)
will flash.
1
3- Chose the programme you want for this day with
.
Save by pressing .
1
4- The programme assigned to the second day of the week
(Tuesday) will flash.
Repeat the procedure described previously (in point 3) for
each day of the week.
1
again.
Correspondence days /
numbers
Monday 1
Tuesday 2
Wednesday 3
Thursday 4
Friday 5
Saturday 6
Sunday 7
‰2÷)
every day.
or
8 16
5- Once you have chosen a programme for each day, confirm
your selection by pressing
cessively scroll on display with the programmes that you set
for them (P1, P2, P3, CONF or ECO).
To exit the Programming mode, press
Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost protection mode, press
for 5 seconds. Press twice, the programme for each day
of the week (Comfort, Eco, P1, P2 or P3) will scroll on display in
front of you.
- To exit the programme viewing mode, press
Manual and temporary exemption from a running
programme
This function allows you to change the setting temperature tem-
porarily until the next scheduled change in temperature or the
transition to 0:00.
Example:
1- The device is in Auto mode, the running programme is Eco
15,5°C.
2- By pressing or , you can change temporarily the
desired temperature up to 18°C for example.
Note: The cursor corresponding to the operating mode, i.e Eco
mode in our example, is blinking during the duration of the tem-
porary derogation.
3- This change will be automatically cancelled at the next
change of programme or transition to 0:00.
OPEN WINDOW DETECTION, ENERGY
SAVINGS
Important information about the open window
detection
Important: the open window detection is sensitive to temper-
ature variations. The device will react to the window openings
in accordance with different parameters: temperature setting,
rise and fall of temperature in the room, outside temperature,
location of the device...
If the device is located close to a front door, the detection
may be disturbed by the air caused by opening door. If this is a
problem, we recommend that you disable the automatic mode
. The days of the week will suc-
twice.
twice.
8