Setting The Comfort Mode Temperature; Consumption Indication Accumulated In Kwh, Energy Savings; Child Anti-Tamper, Keypad Lock/ Unlock; Day And Daily Programme Integrated, Energy Savings - Farho NOVA LITTLE Gebrauchsanweisung

Setting tempera-
ture Ç 19°C
A - Green colour When the setting
Ideal temperature. temperature is
lower or equal to
19°C
SETTING THE COMFORT MODE
TEMPERATURE
You can access the Comfort temperature set up from the Auto
and Comfort Mode. It is preset to 19°C.
Using and you can adjust the temperature from 7°C
to 30°C by intervals of 0.5° C.
Note: you can limit the Comfort temperature,
more details.
CONSUMPTION INDICATION
ACCUMULATED IN KWH, ENERGY
SAVINGS
It is possible to see the estimation of energy consumption in kWh
since the last reset of the energy meter.
Display of the estimated power consumption
To see this estimation, from Auto,
Comfort, Eco or Frost protection
mode, then press .
To exit the display mode of
consumption: press or
device is automatically in the previous active mode.
Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost pro-
tection mode, then proceed as follows.
1- Press .
2- Press simultaneously and
To exit resetting the energy meter, press
vice is automatically in the previous active mode.
CHILD ANTI-TAMPER,
KEYPAD LOCK/ UNLOCK
Keypad lock
To lock the keypad, press the
and buttons and
hold them down for 10 seconds.
The padlock symbol appears
on the display, the keypad is
locked.
see page 12 for
1 2 3 4 5 6 7
, the
for more than 5 seconds.
or , the de-
6 14
Keypad unlock
To unlock the keypad, press the
them down for 10 seconds again. The padlock symbol
pears from the display, keypad is unlocked.
When keypad is locked, only the key
If the device is on Standby mode when the keypad is
locked, you have to unlock it for the next heating on to
access the setup.
7 DAY AND DAILY PROGRAMME
INTEGRATED, ENERGY SAVINGS
In this mode, you have the option of programming your device,
by setting one of the five programmes on offer for each day of
the week.
Access to the programming mode
From Auto, Comfort, Eco or Frost protection mode, press
for 5 seconds to enter into the programming mode.
Schematic sequence of programming settings:
Setting day and time
In this mode, you can set day and time to program your device
in line with your needs.
1- From Auto, Comfort, Eco or Frost protection mode, press
for 5 seconds.
The cursor moves to the setting day and time mode.
2- Select using or . The two hour figures will flash.
The hours will scroll quickly, if you press the
hold them.
Save by pressing .
1
3- The two minute figures will flash.
Select using or .
Save by pressing .
and buttons hold
disap-
is active.
or and
6