Silvercrest SIKP 2000 D1 Bedienungsanleitung Und Serviceinformationen Seite 12

SilverCrest SIKP 2000 D1

Never place the device under flammable items such as
curtains.

The openings on the bottom of the product must never be
covered. Keep a distance of at least 10 cm clear all
around the device and at least 60 cm clear above it to
guarantee sufficient cooling.
Risk of electric shock!

The induction hotplate housing and power cable must
not be damaged in any way. Never replace a damaged
cable, instead contact customer services (see "Guarantee
information" on page 21), If the housing or the power
cord is damaged, there is a risk of electric shock.

Never open the housing of the induction hotplate as there
are no components inside which require maintenance. If
the housing is opened, there is a risk of electric shock.

If you notice any smoke, unusual noises or strange
smells, switch off the device immediately and remove the
plug from the wall socket. If this occurs, do not continue
to use the device and have it checked out by an expert.
Never inhale smoke from a possible device fire. If you do
inadvertently inhale smoke, seek medical attention.
Smoke inhalation can be damaging to your health.

Make sure that the power cord cannot be damaged by
sharp edges or hot spots. Never wrap the power cord
around the hotplate.
10 - English