Care And Cleaning - Kenwood JK60A Bedienungsanleitung

G
Remove the cups and spoons from
the kettle.
G
Fill to 'MAX', boil, then pour the
water away.
G
Wash the cups and spoons and then
dry.
key
lid
on/off switch
neon light
water level gauge
scale filter
2 cups
2 spoons
dual voltage selector
cord clip
to use your travel jug kettle
1 Remove the cups and spoons from
the kettle.
2 Select the required voltage by
turning the selector control
Always check that you have
selected the correct voltage
before using the kettle.
3 Fill it through the spout or lid. The
water level must be between "MAX"
and "MIN" (1 cup/approx. 200mls).
4 Check the lid is closed.
5 Plug in and switch on. The neon will
come on.
6 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
G
If you experience problems
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element is
free from scale - see
"descaling".
7 Always unplug the kettle after use.
G
Take care when using the cups and
do not overfill above the inner rim
(approx. 200mls).
G
Your kettle is fitted with a scale filter
to hold back limescale particles.
G
If you find drops of water under your
kettle, don't worry - it is just
condensation.
boil-dry protection
G
If you switch on with too little water,
your kettle will cut out automatically.
Switch off and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.
approximate boiling times
.
220/240 volts approx 5 minutes for
450 mls (maximum)
110/120 volts approx 5 minutes 40
seconds for 450 mls (maximum)

care and cleaning

G
Before cleaning, unplug your kettle
and let it cool down.
G
The cups and spoons can be placed
in the kettle for compact storage.
G
Wrap the cord around the kettle and
secure using the cord clip
3
.