Care And Cleaning - Kenwood SJM470-Serie Bedienungsanleitungen

before using for the first time
1 Wrap any excess cord around the
bracket on the underside of the
powerbase g.
2 Fill to 'MAX', boil, then pour the
water away. Repeat 3 times.
key
a spout
b flip top lid
c lid release
d water level window
e on/off switch with indicator light
f 360° powerbase
g cord wrap
h filter
to use your kettle
1 Fill the kettle through either the spout
or lid. To open the lid press the lid
release 1. The water level must be
between 'MAX' and 'MIN' SJM480/
SJM490 - 750 mls,
SJM470 - 500 mls.
Be economical: do not boil more
l
water than you need.
To improve the quality of your drinks
l
always use fresh water.
Empty the kettle after each use.
l
Rinse out with fresh water if the kettle
l
has not been used for more than 2
days.
2 Check the lid is closed.
3 Plug in and switch on. The indicator
light will come on.
4 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
Note - To interrupt the boiling
ensure that the switch is
in the off position before
removing from the powerbase.
If you experience problems
l
with your kettle switching
on and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
"descaling".
Your kettle is fitted with a filter to hold
l
back limescale particles.
If you find drops of water under
l
your kettle, don't worry - it is just
condensation.
boil-dry protection
If you switch on with too little water,
l
your kettle will cut out automatically.
Switch off, remove from the
powerbase and let it cool down
before re-filling. When it has cooled
down, the switch will reset itself.

care and cleaning

Before cleaning, unplug your kettle
l
and let it cool down.
the outside and powerbase
Wipe with a damp cloth, then dry. Do
l
not use abrasives - they will scratch
the metal and plastic surfaces.
the inside
Even though your kettle comes with
l
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 To open the lid, push the lid release
1 and pull the lid back 2.
2 Slide the filter out 3.
3 either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 Slide the filter back in to refit 4.
descaling
Regular descaling of the flat element
l
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
problems may be experienced
l
with the kettle switching on and off
during use or switching off before
boiling.
the kettle may take longer to boil.
l
the flat element may be damaged.
l
4