Manually Saving Stations; Go To A Saved Station - Silvercrest SWED 500 A1 Bedienungsanleitung

Manually saving stations

It is possible to save 100 stations or frequencies per frequency band. To do
this, proceed as follows:
 Find a station that you would like to save.
 Briefly press the 'TIME/MEM' button (8).
 The previously chosen memory location (35) is displayed on the screen (5)
and 'PRESET' (24) is flashing.
 Use the 'M-' (16) or 'M+' (14) buttons to choose the memory location in
which you wish to store your station. You can also hold down the buttons to
move more quickly through the numbers.
 Press the 'TIME/MEM' button (8) to finish saving.
Please note this will overwrite memory locations that are already in
use.

Go to a saved station

 To go to a station that you have previously saved, use the 'M-' (16) or 'M+'
(14) buttons to choose the memory location in which your chosen station is
stored. You can also hold down the buttons to move more quickly through
the numbers.
Please note:
The memory locations are not in use in the default setting. When a
memory location not in use is selected, the previously selected
station continues to play.
If a memory location is in use, the stored frequency is maintained
until it is overwritten by saving once again.
If the multi-band radio is not supplied with electricity, the time
settings are lost but any saved stations will be retained.
SilverCrest SWED 500 A1
English - 149