Adjusting The Volume; Adjusting Stations Manually; Searching For The Next Station; Automatic Station Search (Ams Function) - Silvercrest SKR 800 A1 Bedienanleitung

Adjusting the volume

GB
Turn the VOLUME/DISPLAY/
♦
IE
Turn the VOLUME/DISPLAY/
♦
The set volume will be shown on the display

Adjusting stations manually

♦ Press the
♦ Press the
The station frequency is shown on the display and the speaker
station search. If a station broadcasting in stereo is being received, the stereo icon
appears on the display.

Searching for the next station

The device can automatically search for the nearest station.
♦ Press the
next higher frequency.
♦ Press the
the next lower frequency.

Automatic station search (AMS function)

The device uses the AMS function to automatically search for stations and saves them in
the device's 20 preset slots.
♦ Press the
and allocates the stations found to the preset slots
saved, the frequency remains briefly on the display. Once all the station presets are
filled, the search is terminated and the station saved in the first preset is played.

Retrieving saved radio stations

♦ Press the
e.g.
♦ Press or hold down the
♦ Press the
frequency changes automatically to that of the selected preset.
12
button briefly to increase the frequency.
6
button briefly to reduce the frequency.
7
button for about 2 seconds. The device searches for the station with the
button for about 2 seconds. The device searches for the station with
button for about 2 seconds. The device begins the station search
2
button briefly. The current station preset is shown on the display,
.
button or the
button to confirm the selection or wait around 4 seconds until the
dial to the right to increase the volume.
8
dial to the left to decrease the volume.
as a value between
5
to
button to set the required station preset.
(mute) and .
is switched off during the
10
. Every time a station is
SKR 800 A1