DAB+ radio operation (DAB)
Automatic station scan (AMS)
The automatic station scan with station saving scans the entire frequency band
once and automatically saves the DAB+ radio stations found as a station list.
♦
This device must be switched on. If necessary, briefly press the
to switch on the device.
If necessary, briefly press SOURCE /
♦
radio mode is shown on the display
Briefly press the VOLUME |
♦
automatic station scan with station presetting. The display
the message Scanning... DAB and the number of found stations. The scan
progress is displayed as a progress bar. The DAB+ radio stations found
are automatically stored in the station list on order of increasing frequency.
When the scan is finished, the first station in the station list is automatically
played back.
NOTE
►
An automatic station scan with station saving may overwrite an existing
station list.
Selecting stations
Press the TUNE+
♦
from the station list. After approx. 2 seconds, the displayed station is auto-
matically played back.
Saving stations manually
Press the TUNE+
♦
from the station list.
Press the VOLUME |
♦
Press the PRESET button
♦
last selected radio station (if radio stations have already been stored). If no
radio stations have yet been stored, the display
Press the TUNE+
♦
Press the VOLUME |
♦
the selected preset. The preset space of the stored station is shown in the
upper right corner of the display
NOTE
►
Any previously stored stations will be overwritten.
SRH 5 A1
1
ENTER / SCAN dial
8
or TUNE− button
8
or TUNE− button
ENTER / SCAN dial
5
. The display
8
or TUNE− button
ENTER / SCAN dial
1
(e.g. P1 for preset 1).
3
several times until the DAB+
.
6
to start the
1
7
to select a DAB+ radio station
7
to select a DAB+ radio station
6
to confirm the selection.
1
shows the preset space with the
1
shows Preset 1 empty.
7
to select the desired preset.
6
, to store the station in
GB │ IE │ NI
2
button
now shows
│
11
■