Adjusting The Volume; Search For A Station; Manual Station Selection; Saving Stations Manually - Silvercrest SKR 800 C3 Bedienungsanleitung Und Sicherheitshinweise

♦ If required, briefly press the −VOLUME+ |
radio operation is shown in the display
♦ Press the −VOLUME+ |
the device off and set it to Time/Standby operation.

Adjusting the volume

♦ Turn the −VOLUME+ |
volume.
♦ Turn the −VOLUME+ |
volume.
NOTE
► The set volume will be shown on the display
value between

Search for a station

♦ Press the SEARCH + button
station which can be received with a higher frequency.
♦ Press the SEARCH −
station which can be received with a lower frequency.
NOTE
► The station frequency is shown on the display
switched off during the station search. If a station broadcasting in stereo is
being received, ST appears on the display

Manual station selection

♦ Press the SEARCH + button
operation to search for a frequency in 0.1 MHz stages.
NOTE
► The station frequency is shown on the display
in stereo is being received, ST appears on the display

Saving stations manually

♦ Press the SEARCH + button
operation to search for a receivable radio station or a frequency.
♦ Press the
slot, e.g.
♦ Press the PRESET + button
required memory slot.
♦ Press the
slot.
■ 94 │ GB │ MT
/FUNC.
/FUNC. dial
/FUNC. dial
(mute) and (maximum volume).
9 for around 2 seconds to jump to the next
w
button for around 2 seconds to jump to the next
9
or the SEARCH − button
9 or the SEARCH − button
| MEM button
z for around 2 seconds. The current memory
flashes in the display
7
or the PRESET − button
| MEM button
z
to save the station in the selected memory
/FUNC.dial
4
.
1
dial for around 2 seconds to switch
1
to the right to increase the
1
to the left to decrease the
4
for around 3 seconds as a
4 and the speakers
4
.
4
. If a station broadcasting
4
.
4
.
6
1
until FM for
s are
w
during radio
w during radio
to select the
SKR 800 C3