Johnson Controls CD-WA -00-2 Series Installationsanleitung Seite 19

Errors
Error Type
HTM10 error
GM10 error
Internal error
Cause and Possible Solution
Problem with TM10 module.
- Check that the module sits firmly in
place. Remove and reconnect.
- Replace the module if unable to
remove the problem.
Problem with GM10 module.
- Check that the module sits firmly in
place. Remove and reconnect.
- Check that supply voltage is in range.
- Replace the module if unable to
remove the problem.
Internal problem with the transmitter.
- Restart the transmitter.
- Replace the unit if the error persists.
EN
17