System Diagram - Nibe POOL 310 Installateurhandbuch

GB

System diagram

Explanation
CL11
AA25
BT51
EP5
GP9
GP12
HQ4
QN19
EB15
EB101
Docking to pool
Heating of the pool is prioritised according to selected settings in the indoor module. If the pool sensor (BT51) is not
connected, pool charging is not permitted to start.
Outline diagram VVM 310 and POOL 310
-EB101
-FL10
-EB101
Note! This is an outline diagram. Actual installations must be planned according to applicable standards.
14
Pool system
Unit box
Temperature sensor, pool
Heat exchanger, pool
Circulation pump, pool
Charge pump, pool
Particle filter
Three way valve, pool
VVM 310/VVM 320/VVM 325
F2026/F2030/F2040
-CL11
-GP12
-CL11-QN19
-EB15
-RN10 -QM40
XL1
-HQ1 -QM41
XL2
-QM1
FL10
HQ1
QM1
QM40, QM41
RN10
XL1
XL2
Miscel-
laneous
CM1
FL2
XL7
XL8
Designations according to standard IEC 61346-2.
-CL11
-EP5
-GP9
-AA25
-FL2
-CM1
Safety valve
Particle filter
Tapping valve
Shut-off valve
Trim valve
Connection heating medium, supply
Connection heating medium, return
Expansion vessel
Safety valve, climate system
Connection docking, heating medium in
Connection docking, heating medium
out
-BT51
-HQ4