Klarstein Eliana Bedienungsanleitung Seite 31

2. In order to install the activated carbon filter, the grease filter should be detached
first. Press the filter lock and pull the grease filter downward.
3. Turn the carbon filter on both side of the motor anti-clockwise.
4. Replace the carbon filters with the new carbon filters.
5. Replace the grease filter.
6. Plug the mains plug of the cooker hood into the socket.
Notes:
• Make sure that the filter is securely locked. Otherwise it may become loose and
could lead to hazards.
• When activated carbon filter is attached, the suction power will be lowered.
Replace LED light
• The lamp must be replaced by the manufacturer, its service agent or similarly
qualified persons.
• Always switch off the electricity supply before carrying out any operations on the
appliance.
• When handling the LED light, make sure that it has cooled down completely before
touching it directly with your hands.
• When replacing the lamp with a cloth or gloves, hold the lamp firmly to ensure that
it does not come into contact with perspiration as this may reduce the life of the
lamp.
Note: Before changing the lights, make sure that the appliance is plugged off. Protect
yourself from hazards, e. g. with gloves.
Open
Close
EN
31