Exercise Monitor Instruction - U.N.O. Speed Master 1.8M Aufbau- & Benutzerhandbuch

1. Console
1.1 Switch on the device and
insert the safety key into
the console.
2. Button functions
2.1 START/STOP: Start, Stop the treadmill
2.2 "P": PROGRAM-button: Selects the programs (P1, P2, ..., P12) in standby mode.
2.3 "M": MODE-button: In the mode setting, selects the time countdown, distance
countdown and calorie countdown. If you have selected a mode, you can use
the SPEED +/- buttons to set the desired values. Then, press START button to start.
2.4 "SPEED+": Increases the running speed by 0.1km/h.
2.5 "SPEED-": Reduces the running speed by 0.1km/h.
2.6 Speed-instant buttons 2, 4, 6, 8, 10, and 12 adjust the running speed automatically.
3. Programs.
3.1 Pressing the PROGRAM button displays in the speed display P1-P12.
In run mode, it displays the speed between 0.8 - 13km/h or 0.8 - 16km/h.
3.2 Time Mode: Press the MODE button to enter the setting mode, The time
display flashes with the default value of 30:00 minutes. Press the SPEED +/- buttons
to adjust the time. The range is 5: 00-99: 00 minutes. Press the START button to start.
When the countdown at 0:00, the unit stops slowly.
3.3 Distance Mode: Press the MODE button twice to enter the setting mode.
The distance display flashes with the default value from 5.0km. Press the SPEED +/-
buttons to adjust the distance. The range is 0.5-99.9km. Press the START button to
increase to 0.8km/h and then press the SPEED + button to increase the speed.
When the countdown reaches 0.0, the treadmill stops slowly.

Exercise Monitor Instruction

Instruction manual for the console
34