Fakir GALAXIS Benutzerhandbuch Seite 27

Spraying
Steam Spraying
Strong steam feature provides additional steam to remove persistent wrinkles. Rotate the
temperature adjustment knob to " . ." or "..." position. Rotate the variable steam control to the
maximum position. Press the strong steam button to blow a strong steam.
NOTE!
To prevent water leaks from the soleplate, do not press the strong steam button for more
than 5 seconds.
Vertical Steam
Check that adequate amount of water is present in the water reservoir. Bring the steam
iron to vertical position by leaning it on its back and plug the iron. Bring the temperature
adjustment knob and vertical steam control to the maximum position. Keep the iron at
vertical position and press the strong steam button.
Dry Ironing
Steam iron may be used in dry ironing setting even if there is no water inside the water
reservoir; it is better that water reservoir is not filled during dry ironing. Set the variable
steam control to the minimum position. Bring the temperature adjustment knob to the best
suitable position for the fabric to be ironed.
CAUTION!!!
If the steam iron is used for a long period, it becomes very hot and no water is left in it.
Do not fill water until the steam iron is cooled.
You may use the spraying button at any temperature setting
during steam or dry ironing as long as there is adequate amount
of water in the water reservoir.
Press the spraying button a few times to operate the pump while
ironing.
27
EN