Climadiff PRO116XDZ Gebrauchsanweisung Seite 32

7. Remove the left lower hinge supporter with the adjusting washer. Install the right lower hinge
supporter from the plastic bag that includes the instruction manual. Make sure to put the adjusting
washers at the designated position.
8. Rotate door at 180 degrees. Locate the glass door to the designated position making sure that the
door shaft enters the door hole at the left upper corner of the glass door. Install the two screws that
are used to connect the left lower hinge with the glass door and tighten them before the door is
leveled.
32