Putting Into Operation - Abicor Binzel Rbc 61Gd Betriebsanleitung

MAG

4 Putting into operation

4.1 Equipping the torch
1
1 Gas nozzle
2 Contact tip
Fig. 1 Typ 61D/610D
4.2 Mounting the wire guide liner
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply.
• Cut off the gas supply.
• Pull the mains plug.
CAUTION
Risk of injury
Through-hole or puncture caused by electrode tip.
• Do not reach into the danger zone.
• Wear protective gloves.
Equip the torch neck according to the following figure:
2
3 Tip adaptor
4 Gas diffuser
NOTE
• New still unused liners have to be shortened to the actual length of the
cable assembly.
3 4
5 Torch neck
4 Putting into operation
5
EN - 5