Set The Date & Time; Set The Time Format - Imperial DABMAN i450CD Bedienungsanleitung

7. SETTINGS
The device is factory-configured to automatically set the time. If
the device is connected to the Internet via a network, the time
and date are automatically synchronised. It is thus not necessary
to set the time.
E
7.1.4.1. Set the date & time
Use the ▼▲ buttons on the remote control to select Set date
and time and press the ENTER button on the remote or confirm
by using ENTER on the device.
Select the Manual setup menu item and
press the ENTER button on the remote control or confirm with
ENTER on the unit.
Use the ▼▲ buttons on the device or on the remote control to
set the time or date.
Please use the ►◄ buttons to jump to the next or previous field.
Using the ENTER button on the remote or a short press of the
ENTER button on the radio concludes the entry.

7.1.4.2. Set the time format

Change the time format here to set how the time is displayed.
You can choose a 12- or 24-hour display.
Select the Set Time Format menu item and press
the ENTER button on the remote control or confirm
by pressing the ENTER button on the device.
Now change the time display to the desired format and confirm
with ENTER on the remote control or confirm
by pressing the ENTER button on the device.
Operating Manual 148