Network Connection; Language Selection; Network Check - Imperial DABMAN i450CD Bedienungsanleitung

6. INSTALLATION

6.5. Network connection

To use the radio's Internet functions, the device must be con-
nected to a network. You can use a cable (LAN) or the integrated
E
WIFI receiver to make a connection. If you are using a LAN cable,
connect it to the LAN connector (see image on page 24, point
13).

6.6. Language selection

Turn on the main switch on the back of the unit. The radio will
start.
Use the up/down buttons on the remote control to select the
menu language. Confirm the desired menu language with the
ENTER button on the remote control.

6.7 Network check

If you want to connect the radio to your home network, confirm
the following menu prompt with Yes. With this setting, the radio
checks the available networks each time it turns on.
Operating Manual 136