Wireless Network (Wps Pbc); Manual Configuration - Imperial DABMAN i450CD Bedienungsanleitung

7. SETTINGS
Confirm your entry with ENTER.
Please note that the registration process may take a while.

7.1.3.3. WIRELESS network (WPS PBC)

E
WPS is a function on WIFI devices that allows you to establish
a network connection at the touch of a button without having to
enter a password.
This makes it easier to create a connection.
This radio-supported push button configuration can be used if the
network router to which a connection is to be established has a
WPS button. (Some routers offers this directly as a software
solution in the operating system).
To establish a network connection this way,
please proceed as follows.
Use the ▼▲ buttons on the remote control to select WIRE-
LESS network (WPS PBC) and press the ENTER button on the
remote or confirm by using ENTER on the device.
Now press the WPS button on your network router
within 120 seconds, or activate the WPS function in the router's
user interface.
The network connection is now established automatically.

7.1.3.4. Manual configuration

In this section, you can configure the network configuration of the
radio yourself to match it with the
network settings.
This function should only be performed by users with experience
Operating Manual 144