Concept VS6033 Bedienungsanleitung Seite 21

EN
3. Assemble the upper part of the unit according to Fig. 2. Secure the front and back grilles from opening by using
the catch.
Front grille catch
OPERATING INSTRUCTIONS
1. Place the unit on a stable surface or floor to avoid tipping over.
2. Uncoil the supply cable.
3. Loosen the stand nut, adjust the required height of the fan, and tighten the stand nut again.
4. Adjust the required inclination of the fan (Fig. 3).
5. Connect the power cord plug to the wall outlet.
6. Choose the required performance level using the mode selector (Fig. 4).
7. By pulling out the oscillation selector you may turn off the oscillation during operation (Fig. 5). By pushing in the
selector you may turn on the oscillation.
Fig. 3
8. After use, move the mode selector to the 0 position and unplug the unit from the socket.
VS6033
grille nut
impeller
Fig. 2
grille nut
Back grille
Fig. 4
drive
shaft
pin
Fig. 5
19