Frost Protection - STIEBEL ELTRON RFT-TC Benutzerhandbuch

Frost Protection

Mon 11:15
23.5
°
17:00
Manual Other...
Comfort
Mon 11:15 Boost Comfort
Boost Frost Protect
23.5
°
17:00
2
Holiday Frost Protect
1
Manual Other... Holiday
Frost Protect
1
5
°
3 4
5
PAGE 18
© 2018 OJ Electronics A/S
Frost Protection mode is used when heating is not needed but the temperature must
be kept above freezing point until changed manually .
1 . Tap the "Other" button on the home screen .
2 . Tap the "Frost Protection" button .
A confirmation screen will then be displayed briefly before the thermostat
automatically enters the Frost Protection home screen .
While in Frost Protection mode an ice crystal and glove are displayed on the home
1 screen together with the target/setpoint temperature (5 .0°C) .
Frost Protection home screen:
1 . Indication of Frost Protection mode .
2
2 . Tap here to access the menus .
3 . Icon indicating the current operating mode (ice crystal and glove = Frost
Protection) .
4 . Fixed target/setpoint temperature (if shown in red, heating is being provided) .
5 . Tap here to return to Scheduled Operation .
< >
Contents