Startup Wizard 1/2 - STIEBEL ELTRON RFT-TC Benutzerhandbuch

Startup Wizard 1/2

Date
01 02 2014
Date
01 02 2014
Language 1
Language 2
Language 3
Region 1
Region 2
Region 3
PAGE 5
© 2018 OJ Electronics A/S
When the system has been installed and turned on for the first time, or after you
have performed a factory reset, you must set Region, Language, Date, Time and
Floor Type* .
The thermostat will automatically guide you through the process .
1 . Region – set the time region in which the thermostat is located .
This parameter is used, for example, to ensure correct use of Daylight Saving
Time .
Tap the time region you are in .
Confirm with "√"
2 . Language – set the language to be used on the thermostat display .
Tap the language you prefer . Confirm with "√" .
3 . Date – set the current date .
Tap the parameter you want to change . Use the "Up Arrow" or "Down Arrow"
button to set the day, month and year .
Confirm each setting with "√" .
4 . Time – set the current time .
Tap the parameter you want to change . Use the "Up Arrow" or "Down Arrow"
button to set the hours and minutes .
Confirm each setting with "√" .
<
Contents
>
* RTF-TC Thermostats only
)