En 50559 - STIEBEL ELTRON RFT-TC Benutzerhandbuch

EN 50559*

Mon 11:15
23.5
°
17:00
Manual Other...
Mon 11:15
1
23.5
°
17:00
Manual Other...
Adaptive Function
Heating Schedule
Adaptive Function
Open Window
Heating Schedule Energy Use
Sensor Application Open Window
User Settings Energy Use
2
Sensor Application Sensor Type
Engineer Settings User Settings
Sensor Type Floor Sens. Calibr.
Engineer Settings
Heating Schedule
Floor Sens. Calibr. Room Sens. Calibr.
Energy Use
Temp. Scale Adaptive Function Room Sens. Calibr.
User Settings
Open Window Temp. Scale Factory Reset
3
Engineer Settings
Factory Reset EN50559 Sensor Application
Sensor Type
Floor Sens. Calibr.
EN50559
Room Sens. Calibr.
1
Temp. Scale
Min.
Factory Reset
4 5 4
PAGE 55
© 2018 OJ Electronics A/S
This thermostat complies with EN 50559:2013 (VDE 0705-559) for electrical floor
heating . The regulation applies to electrical floor heating, with a maximum floor
1
weight of 4 kN/m² . To ensure that hotspots due to unintentionally covering up the
surface are avoided, the heating function can be time-limited as per EN/DIN .
Note that this function is not applicable to other heating applications such as wall
and/or ceiling heating
If it can be foreseen in advance that unintentional covering up of a floor might occur,
then it is important to assess the correct period of time for which the floor heating
must be time-limited .
The heating can be limited by using a set number of minutes per hour .
The factory setting is 0 minutes .
RTF-TC:
1 . Tap the "Menu" button on the home screen .
2 . Then tap the "Engineer Settings" button .
3 . Scroll down and tap the "EN 50559" button .
4 . Use the "Up Arrow" or "Down Arrow" button to set the number of minutes – the
thermostat should not heat per hour .
5 . Confirm the value with "√" .
6 . The thermostat will automatically return to "Engineer Settings" .
< >
Contents
*⁾ RTF-TC Thermostats only