Check The Loading Status; Seal The Case - Olympus PT-031 Bedienungsanleitung

Check the loading status.

Always perform the following final checks before sealing the Case.
Has the digital camera been inserted properly?
Has the silica gel been inserted all the way at the specified position?
Has the O-ring at the Case opening part been installed properly?
Are the O-ring and the O-ring contact surface on the front lid free of
dirt and other foreign matter?

Seal the Case.

When the rear lid is closed (quietly, so that the O-ring will not come
out of the groove), the buckles are engaged with the edge of the rear
lid, and the buckle lock levers are pushed down in arrow direction, the
Case will be sealed airtight.
CAUTION : • Seal the Case by turning both buckle lock levers down
in arrow direction. When one of the buckles is left
open, the Case will not be sealed and water leakage
will be caused.
E-18