Adjust The Mode Switch Position; Put The Digital Camera Into The Case - Olympus PT-031 Bedienungsanleitung

Adjust the mode switch position.

Set the position of the mode switch on the Case to the same mode
( , or ) set using the mode switch of the loaded digital camera.
Example
Camera's mode
switch
Case's mode
switch

Put the digital camera into the case.

Make sure the digital camera is turned off, then insert it gently into
the case.
CAUTION : • If the digital camera is not inserted properly, it may not
be possible to seal the case so that it is airtight.
Alternatively, some controls may become inoperable.
Note that imperfect sealing may result in water
penetration.
If the camera is set to the
shooting mode, adjust the
position of the Case's mode
switch to the
mode.
E-16
shooting