Olympus PT-031 Bedienungsanleitung Seite 67

Remove any foreign matter attached to the O-ring groove using a lint-
free clean cloth or cotton swab. Also remove any sand or dirt attached
to the O-ring contact surface on the front lid of the case.
CAUTION : • When a mechanical pencil or a similar other sharp object
is used to remove the O-ring or to clean the inside of the
O-ring groove, the Case and the O-ring may be damaged
and water leakage may be caused.
• When the O-ring is checked with the fingertips, take care
not to stretch the O-ring.
• Never use alcohol, thinner, benzene or similar solvents or
chemical detergents to clean the O-ring. When such
chemicals are used, it is to be feared that the O-ring will
be damaged or that its deterioration will be accelerated.
E-30