Pando E200/110 Bedienungsanleitung Mit Montageanweisungen Seite 24

Accumulations of grease de-
posits can cause fires. Never
use the hood without the anti-
grease filter.
- The installation must respect
the norms in force regard-
ing the ventilation of closed
rooms.
In practice, the air extracted
must not pass through a tube
used for discharging fumes
from appliances that utilize
gas or other combustibles
(central heating systems, etc.).
- Ventilate the environment
correctly if the hood functions
simultaneously with other ap-
pliances fed by a different en-
ergy source so that the hood
does not extract mixed gases.
Attention!
must be taken to ensure that
the hood does not absorb part
of the air destined for combus-
tion during the simultaneous
functioning of the hood with
an "extraction system" and a
heating system dependent on
the ambient air (heaters that
use gas, oil, coal, chimneys,
etc.) because it could cause an
accumulation of carbon mon-
oxide in dangerous quantities
in the room or the home which
could cause death. If an ex-
traction hood is installed only
or connected to a combustion
element such as a stove,
Maximum
a chimney or a room heating
system, it is compulsory to
contact the manufacturer and
the installer of these elements
to have an optimal function-
ing without any risk.
- Maintain a maximum am-
bient pressure of 0.04 mbar.
This
excellent functioning of the
hood. To obtain this type of
ambience, permanently main-
tain the air inlet open to avoid
blocking the passage of air (it
is advisable to install an aera-
tion grill). Leaving windows
and doors open is not the
right solution.
- The electricity mains sup-
ply must be stable and in
care line with the indicated elec-
trical requirements (refer to
the plate with the character-
istics of the appliance). If the
electricity mains supply is not
stable and there were varia-
tions of voltage, intensity or
frequency, harmonic distor-
tion, transitory currents, volt-
age drops, overloads, tempo-
ral variations, etc., the hood
could malfunction or have a
fault and the repair would not
be covered by the guarantee.
In this case, it will be neces-
sary to disconnect the hood
and contact an electrician or
the electricity company to re-
23
condition permits an