Pando E200/110 Bedienungsanleitung Mit Montageanweisungen Seite 23

electrician to carry out this in-
stallation in accordance with
installation norms.
- Particular attention must be
paid to where the wall or ceil-
ing is drilled and therefore
check beforehand that there
are no hidden electrical cables,
tubing, metal beams, etc. that
could cause serious faults, cur-
rent derivations or transmis-
sion of noises and vibrations.
- IMPORTANT: During the
installation and before car-
rying out the electrical con-
nection of the appliance, al-
ways disconnect the power
supply from the panel (dif-
ferential or
netic circuit breakers of the
home's consumer unit).
- WARNING: Always discon-
nect the hood from the pow-
er supply by removing the
plug or disconnecting the
differential/thermomagnetic
switch from the home's con-
sumer unit before proceed-
ing with cleaning and main-
tenance operations.
use steam or high pressure
appliances to clean the hood
(norm relative to electrical
safety). Refer to paragraph 5
"Cleaning and Maintenance".
thermomag-
Never
- It is forbidden to cook food
directly on the gas flames or
switch on the gas burners
without first placing a cooking
utensil underneath the hood
(the extracted flames could
damage the appliance and
the guarantee would become
invalid). It is forbidden to use
the appliance above a com-
bustible burner stove (wood,
coal, etc.).
When frying food underneath
the hood, the operation must
be constantly checked be-
cause oils and grease at a high
temperature could catch fire.
Do not make fanning move-
ments under the hood.
- Attention: There is the risk
of burning in the unreach-
able parts because they could
overheat when utilized with
cooking appliances.
- The minimum distance be-
tween the utensil's support
surface for cooking on the hob
and the lower part of the hood
must be at least 65 cms., if
the extractor hood is installed
above a gas cooking element.
Respect the installation in-
structions of the gas cooking
element if a greater distance
is recommended.
- Respect the time limits re-
garding the cleaning and sub-
stitution of the filters.
22