Ryobi RLT30CESC Bedienungsanleitung Seite 17

The following signal words and meanings are intended to explain the levels of risk associated with the product.
SYMBOLS SIGNAL
DANGER
WARNING
CAUTION
CAUTION
English(Original instructions)
Keep hands away from blades.
Run position
Set the choke lever to "FULL" choke position.
Set the choke lever to "HALF" choke position.
Set the ignition switch to the "I" (ON) position.
Press the primer bulb 10 times.
Pull the starter rope to start.
Squeeze the throttle lock and throttle trigger to run.
Wait 10 seconds.
To stop the engine, move the ignition switch to the "O"
stop position .
Conforms to all regulatory standards in the country in the
EU where the product is purchased..
EurAsian Conformity Mark
Ukrainian mark of conformity
Guaranteed sound power level is 112 dB.
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
14
MEANING