Sony PDBK-202 Bedienungsanleitung Seite 8

Examples of DVB-ASI output usage
PDW-HR1 (with this board installed)
a) DVB-ASI
8
Additional Function Menu Settings
a)
Modulator
Distribution system
Additional Function Menu
Settings
When this board is installed in the PDW-HR1, the
underlined settings in the following tables appear in the
function menu.
Refer to Chapter 3 "Preparations" in the PDW-HR1
Operation Manual for more information about function
menu operations.
P1 VIDEO page
Item Setting
F1: V INPUT Selects the video input signal.
HDSDI: HDSDI signal
SDSDI: SDSDI signal
CMPST: Composite signal
i.LINK: i.LINK signal
SG: Test signal from internal signal
generator
Notes
• When "i.LINK" is selected, HDSDI output and SDSDI
output in the PDW-HR1's E-E mode is not guaranteed.
• When "i.LINK" is selected, DVB-ASI TS signals are not
output in the PDW-HR1's REC mode or E-E mode.
P2 AUDIO page
Item Setting
F1: AU INPUT Selects the audio input signal to assign to
audio channels 1 to 8.
SDI: Audio signal embedded into SDI
signal.
ANALOG1: Analog 1 audio signal.
SG: Test signal from internal signal
generator.
i.LINK: i.LINK signal
Sub-item
F1: A1 INPUT (A5
INPUT)
F2: A2 INPUT (A6
INPUT)
F3: A3 INPUT (A7
INPUT)
F4: A4 INPUT (A8
INPUT)
Note
When F1: V INPUT in the P1 VIDEO page of the function
menu is set to "i.LINK", A1 INPUT to A4 INPUT on the
P2 AUDIO page are also set to "i.LINK".
Input signal of audio
channel 1 (5)
Input signal of audio
channel 2 (6)
Input signal of audio
channel 3 (7)
Input signal of audio
channel 4 (8)