Charging The Battery; Displaying State Of Charge - Stihl GTA 26 Gebrauchsanleitung

English
2
1
a
b
a
► Check the following points when mounting
the charger on a wall:
– Suitable fixing materials.
– The charger is level.
– The following dimensions are observed:
– a = at least 100 mm
– b = 54 mm
– c = 4.5 mm
– d = 9 mm
– e = 2.5 mm
6.2

Charging the Battery

The charging time depends on several factors, e.g.
temperature of the battery or the ambient temperature. The
actual charging time may differ from the specified charging
time. For specified charging times see
www.stihl.com/charging-times.
The charging process starts automatically
when the plug is inserted in a wall outlet and
the battery is fitted in the charger. The
charger switches itself off automatically when
the battery is fully charged.
The battery and charger become hot during the charging
process.
54
3
1
d
e
e
► Insert the plug (5) in a convenient wall outlet (6).
The charger (2) runs a self test. The LED (3) glows green
for about 1 second and then red for about 1 second.
► Fit the connecting cable (4).
► Insert the battery (1) in the guides in the charger (2) and
press it home as far as stop.
The LED (3) glows or flashes green. The battery (2) is
being charged.
► If the LEDs (3) stop glowing: The battery is fully charged
and can be taken out of the charger (2).
► If the charger (2) is no longer required. Disconnect the
plug (5) from the wall outlet (6).
6.3

Displaying State of Charge

1
► Fit the battery.
6 Charging the Battery, LEDs
2
5
3 4
80-100%
60-80%
40-60%
20-40%
0-20%
0458-694-9621-A
6