Switching Off The Garden Pruner; Checking The Garden Pruner And Battery; Checking The Chain Sprocket; Checking The Guide Bar - Stihl GTA 26 Gebrauchsanleitung

English
► Pull the trigger (4) with your index finger and hold it there.
The motor accelerates and the chain rotates. Release the
lockout lever (3).
9.2

Switching Off the Garden Pruner

► Release the trigger.
The chain stops rotating.
► If the chain continues to rotate: Remove the battery and
contact your STIHL dealer for assistance.
The garden pruner is defective.
10 Checking the Garden Pruner and
Battery

10.1 Checking the Chain Sprocket

► Switch off the garden pruner and remove the battery.
► Remove the chain sprocket cover.
► Remove the bar and chain.
a
► Use a STIHL gauge to check the wear marks on the
sprocket.
► If wear marks are deeper than a = 0.5 mm: Do not use the
garden pruner and contact your STIHL dealer for
assistance.
The chain sprocket must be replaced.

10.2 Checking the Guide Bar

► Switch off the garden pruner and remove the battery.
58

10 Checking the Garden Pruner and Battery

► Remove the chain and guide bar.
► Measure depth of bar groove with scale on STIHL filing
gauge.
► Install a new guide bar if one of the following points
applies:
– Guide bar is damaged.
– Measured bar groove depth is less than specified
minimum depth, @ 19.3.
– Bar groove is pinched or splayed.
► If you have any queries: Contact a STIHL servicing dealer
for assistance.

10.3 Checking the Saw Chain

► Switch off the garden pruner and remove the battery.
2
1
0458-694-9621-A