Leds On Garden Pruner; Led On Charger; Assembling The Garden Pruner; Removing And Fitting The Bar And Chain - Stihl GTA 26 Gebrauchsanleitung

7 Assembling the Garden Pruner

► Press the button (1).
The LEDs glow green for about 5 seconds and indicate the
state of charge.
► If the left LED flashes green: Charge the battery.
6.4

LEDs on Garden Pruner

The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 18.
There is a malfunction in the garden pruner or battery.
6.5

LED on Charger

The LED indicates the operating status of the charger or
faults. The LED can glow or flash green or red.
If the LED glows or flashes green, the battery is being
charged.
► If the LED glows or flashes red: Troubleshooting, @ 18.
There is a malfunction in charger or battery.
7 Assembling the Garden Pruner
7.1

Removing and Fitting the Bar and Chain

7.1.1 Removing the bar and chain
► Switch off the garden pruner and remove the battery.
0458-694-9621-A
2
1
3
► Raise the grip (1) of the wingnut (2).
► Rotate the wingnut (2) counterclockwise until the chain
sprocket cover (3) can be removed.
► Remove the chain sprocket cover (3).
► Remove the bar and chain.
7.1.2

Mounting the bar and chain

The bar and chain combinations that can be used with the
chain sprocket are listed in the specifications, @ 20.1.
► Fit the chain in the bar groove so that the arrows on the tie
straps on the top of the bar point in the direction of
rotation.
English
55