Klarstein Tap2Go Handbuch Seite 15

3
Once the beer dispenser is assembled,
plug the unit into a wall outlet or car
cigarette lighter. The beer temperature
now drops to 3-6 °C and then remains
constant.
4
The tapping unit must be permanently
installed before use. Normally, the tap
handle should point upwards. In this
case the tap is closed. Slowly pull the
tap handle down until the beer begins to
flow. If you pull the handle down to 90°
and release it, it will automatically return
to the original position.
5
If there is no beer barrel in the dispenser,
remove the dispenser unit. You can now
use the unit as a beverage cooler.
EN
15