Safety Signs; Product Identification Label - Stiga BC 80 Li Gebrauchsanweisung

– using of the machine by more
than one person.
IMPORTANT Improper use of the machine
will invalidate the warranty, relieve the
Manufacturer from all liability, and the user
will consequently be liable for all and any
damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by
consumers, i.e. non-professional operators.
The machine is intended for "DIY" use

3.2 SAFETY SIGNS

The machine has various symbols on it
(fig. 2). They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
Class II
Double insulation
WARNING! DANGER!
Failure to use this machine
correctly can be hazardous
for oneself and others.
Read the instruction manual
before using the machine
Anyone operating the
machine under normal
conditions for continuous
daily use may be exposed
to a noise level equal to or
exceeding 85 dB (A). Wear
ear protectors, safety goggles
and a protective helmet.
Wear gloves and safety boots!
PROJECTION HAZARD!
Be careful of flying debris
projected by the cutting
means, that can cause
serious injuries to persons
or damage to things.
only.
<5500
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised assistance centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. Sound power level
2. Conformity marking
3. Year of manufacture
4. Type of machine
5. Manufacturer's reference model
6. Serial number
7. Name and address of Manufacturer
8. Article code
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an authorised service workshop.
EN - 7
PROJECTION HAZARD!
Keep any people or pets
at least 15m away when
using the machine!
Beware of blade thrust.
Keep away from bystanders.
Maximum cutting
means speed.
Do not use circular saw
blades. Danger: Using
circular saw blades
on models that are
not designed for them
exposes the user to the
danger of very serious
or even fatal injuries.
Do not leave the
machine in the rain (or
in damp conditions).